- Ball Bearings
- Deep Groove Ball Bearings
(Single/Double) - Small Diameter Ball Bearings
- Three-point Contact Ball Bearings
- Four-point Contact Ball Bearings
- Self-aligning Ball Bearings
- Bearing Units
- Thrust Bearings
- Slewing Bearings
- Ball-roller Bearings
- Long-neck Flange Type
- Short-neck without Flange Type
- Rivet Type
- Resin-covered Bearings
- Truss Bearings
- Rollers
- Long-neck Flange Type
- Short-neck without Flange Type
- Rivet Type
- Hardwares
- Power-transmission Parts
Three-point Contact
Ball Bearings
This bearing is used when both a load perpendicular to the axis of rotation and a load in the direction of the axis of rotation are simultaneously received.
The configuration consists of balls filling the raceway with no gaps with the cage excluded.
The contact points are one on the outer ring and one on each of the separate inner rings, and they come into constant contact at all three points, which is the same configuration as our ball roller bearing type.
The main benefits of this bearing (in comparison to our four-point contact type) are that it is able to maintain stability under similar loads, yet it is significantly cheaper for our clients, and it also can be produced in all stainless steel when that is required.
ORBIS supplies the separated inner ring in combination with the shaft for our clients convenience.
Not only has the variety of sizes and shapes, and materials expanded the range of choices, but the stable durability, reasonable price, and ease of assembly are sure to provide greater satisfaction and benefits to all our clients.
For more detailed information, please contact us.
Components & Materials
Normal bearing type
※ The green line represents the contact angle.
Resin-covered type
※ The green line represents the contact angle.
※ In this case, small-volume production is not suitable.
※ In the case of our SP Type ball roller bearings, the outer ring material is POM, the inner ring is SPCC, and the ball is 402J2 (limited in size to 1/8″
The main specifications of the supplied bearings correspond to No.6000 ~ 6005 of deep groove ball bearings.
specification table
unit : mm
| Bearing No. | d | D | w | r |
|---|---|---|---|---|
| 6000 | 10 | 26 | 8 | 0.3 |
| 6001 | 12 | 28 | 8 | 0.3 |
| 6002 | 15 | 32 | 9 | 0.3 |
| 6003 | 17 | 35 | 10 | 0.3 |
| 6004 | 20 | 42 | 12 | 0.6 |
| 6005 | 25 | 47 | 12 | 0.6 |
※Bearings are smaller in inner diameter, outer diameter, and width than 4-point contact bearings.
Application example
Furniture FLAT DOOR(Currently under durability test)
A joy for our clients to use
A joy for our team to make
A joy for partners to supply